The Purchase Guide of Uv Flatbed Printer from The Device Itself

1. Look at the nozzle

a. The nozzle represents the core technology of the uv flatbed printer. The higher the specifications of the nozzles that can be selected, the higher the number of nozzles that can be equipped on the equipment, which proves that the technical level is high. Otherwise, if the salesman sells most of the three g5 nozzles Or two Epson series nozzles are not cost-effective. However, the price of the board purchased in this configuration is low, and it will rarely support the upgrade in the later stage.

 b. Sprinkler specifications, each series of nozzles are divided into low-end, mid-end, high-end, top-level, different models of nozzles, if not professional users, can not remember these names, you can see the price, after all, a penny The goods are unchanged. The expensive nozzles must be better than the cheaper nozzles in terms of core performance. There are no good and cheap uv flatbed printer nozzles.

c. The nozzle is open or not open. Some nozzles on the market are open-type, and the supporting boards are also open. The number of this type of uv flatbed printer company is also very large. After all, the threshold is relatively low. For users, the price may be very cheap. However, the uv flatbed printer company that may be bought is assembled and put together. It does not have the level of R&D technology. If there is a fault in the later stage, it is basically replaced by a new one.


2. Look at the format

a. The overall format, the larger the format, can reflect the hardware design level of this uv flatbed printer company. Although it may not be used by itself, when asked, ask the company salesman whether there is a large or largest How big, compare each other.

b. Print width, this is the core of the format. The wider the width, the higher the cost of the equipment. The faster the printing speed in the same configuration, the higher the hardware level of the manufacturer. When conditions permit, try to choose a large format uv printer.

 c. If the size of the web is smaller, the error in physical precision is smaller, regardless of the cut corner. If the printed material itself is small in volume, the smaller the size of the device, the better the mechanical precision is than the large format.

3. Look at the core accessories

a. Curing lamp: The price of the uv led lamp is higher than that of the mercury lamp, and the lamp type of the lamp type is higher than the lamp type. A good curing light determines that the pattern will dry thoroughly during printing, avoiding peeling and fading. At the same time, the lifespan is also long and the stability is high. Of course, the price of thousands to tens of thousands, hundreds of thousands of sets of curing lights are available.


b. Gantry milling: whether the beam, frame and other components are gantry milling, washed 1 time or 2 times, the difference between the two is often more than 1 times, industrial type uv flatbed printer or large brand printers, core components will be Gantry milling, so precision, stability and other aspects are good.

c. Motor, guide rail, screw and other brands, this can be seen on the direct parts to identify, the quality of the big brand is more guaranteed. If you are all unknown small brands, be cautious, otherwise the late failure rate will be very headache.


We have our own brand of printer, ORIC, and we also agent other brands abroad, such as EPSON, MIMAKI, ROLAND and MUTOH.

We mainly focus on researching and developing high-speed and high-resolution inkjet printers and control system, our printers and accessories have the honor to earn widespread acclaim by the firmly support of the top R&D team and our own technology. Major products are E series water-based printers, R series UV printer, O series flatbed printers etc.